HDMI-RGB 300 A
From Ju's wiki
RGB to HDMI converter and upscaler by Extron. Other very similar devices in the same series are the HDMI-RGB 300 (lacking analog audio input) and RGB-DVI 300 (DVI instead of HDMI and no analog audio).
Firmware
Final known firmware for all RGB 300 series devices is 1.16, with a build date of 2014-08-08.
Updating firmware
You need:
- RS-232 data cable (ideally something official, I used a USB to serial DB9 dongle, then jumper wires from pin 2 to TX, pin 3 to RX and pin 5 to GND)
- The firmware loader application, FirmwareLoader_v5x3.exe
- The installer for the firmware blob, rgb300_series_FW1x16.exe
Extron doesn't allow end users to download software from their website.
Compatibility
| Input device | Result | Notes |
|---|---|---|
| MIST | works | SNES core NTSC small issues - bit of flicker+scanlines blend in. Other cores seem ok. |
| Voodoo3 | works |
